Bag clip

Choose the length and width – the clip prints flat and open, with a spring at one end and a snap hook at the other. Close it, and a ridge presses the bag into a groove, so nothing spills and the contents stay fresh.

Calculated in your browser. We only count which settings are downloaded.

Size

Clamping lengthmm

How wide the folded bag may be. 90 mm suits crisp bags, 120–150 mm coffee or flour.

Widthmm

How deep the clip grips – this is also its height on the print bed.

Type a number and press Enter, or use the slider.

Shape

Arm thicknessmm

Thick arms clamp harder, but the spring gets stiffer. 3 mm suits most bags.

With ridge Flat

A ridge on one arm presses the bag into a groove in the other: it closes tighter and doesn't slip out.

Number

Number of clips

Several clips one below the other in a single print.

Download

Print flat as shown, without supports – the clip comes off the printer open. Close it once after printing: press the arms together until the upper arm clicks in under the nose of the hook. To open, push the tab of the hook outwards. PETG springs best and copes with the freezer; PLA works too. 3MF keeps the parts apart and in millimetres. Every slicer opens 3MF and STL.

Share settings as a link

Ready-made models

Finished sizes from this generator, ready to download.

All 8 in the library