Garden hose holder
1 h 24 min1 part
Mini clips for seed packets
3D printing1 partBeginner-friendlyNo supports
Three small clips in one print for seed packets, spice bags and tea bags: opened seed packets stay closed, and the rest of the seeds keep until next spring. Each clip takes bags up to 40 mm wide, is 53.8 mm long and only 8 mm wide, with thin 2 mm arms. All three need 53.8 × 68 mm on the print bed.
Download
The file is made in your browser. We only count how often it is downloaded.
Join in
- Size
- 53.8 × 68.03 × 8 mm
- Print time
- ≈ 19 min
- Filament
- ≈ 7.5 g PETG
- Parts
- 1
Print settings
- Material
- PETG
- Layer height
- 0.2 mm
- Infill
- 15%
- Walls
- 3
- Supports
- none
Worked for others:
Tip: Print flat as shown, without supports – the clip comes off the printer open. Close it once after printing: press the arms together until the upper arm clicks in under the nose of the hook. To open, push the tab of the hook outwards. PETG springs best and copes with the freezer; PLA works too.
Estimated by our slicer-like calculation for a 0.4 mm nozzle. Your slicer may show slightly different values.
Adjust it
- Size as printed: 53.8 × 68 mm, 8 mm high
- Clamping length 40 mm, 8 mm wide
- With sealing ridge and groove
- Hole in the spring: 6 mm, to hang it up
- 3 clips in one print
This model comes from the “Bag clip” generator. Open it there with these settings and change any size you like.
Open in the generatorSimilar models
Garden hose holder
Garden tool hook
1 h 1 min1 part
S-hook for hanging baskets
24 min1 part
Holder for 16 mm drip irrigation pipe
9 min1 part
Something wrong with this model? Report a problem