Jewellery box with 6 compartments
2 h 34 min2 parts
Large clip for pet food and soil bags
3D printing1 partBeginner-friendlyNo supports
A big, strong clip for the large bags in the house: dry pet food, potting soil, bird seed or charcoal. It takes bags up to 190 mm wide; the jaws are 20 mm wide and the arms 4 mm thick, so it holds even heavy bags shut. It is 211.6 mm long and fits on a 220 mm print bed. Print it in PETG; the hole in the spring hangs it on a nail in the shed.
Download
The file is made in your browser. We only count how often it is downloaded.
Join in
- Size
- 211.6 × 37.63 × 20 mm
- Print time
- ≈ 1 h
- Filament
- ≈ 26 g PETG
- Parts
- 1
Print settings
- Material
- PETG
- Layer height
- 0.2 mm
- Infill
- 15%
- Walls
- 3
- Supports
- none
Worked for others:
Tip: Print flat as shown, without supports – the clip comes off the printer open. Close it once after printing: press the arms together until the upper arm clicks in under the nose of the hook. To open, push the tab of the hook outwards. PETG springs best and copes with the freezer; PLA works too.
Estimated by our slicer-like calculation for a 0.4 mm nozzle. Your slicer may show slightly different values.
Adjust it
- Size as printed: 211.6 × 37.6 mm, 20 mm high
- Clamping length 190 mm, 20 mm wide
- With sealing ridge and groove
- Hole in the spring: 8 mm, to hang it up
This model comes from the “Bag clip” generator. Open it there with these settings and change any size you like.
Open in the generatorSimilar models
Jewellery box with 6 compartments
Box for 10 AA batteries
2 h 32 min2 parts
Cosmetics drawer organizer
4 h 38 min1 part
Jewellery drawer organizer, 24 compartments
3 h 16 min1 part
Something wrong with this model? Report a problem