Bin for Gridfinity

Choose the size in grid units – the bin fits every Gridfinity baseplate and stacks on other bins. Gridfinity is the open storage system by Zack Freedman.

Calculated in your browser. Nothing is uploaded.

Size

Width (X)× 42 mm

Depth (Y)× 42 mm

Height (Z)× 7 mm

Gridfinity counts height in units of 7 mm. The stacking lip adds 3.8 mm on top.

Type a number and press Enter, or use the slider.

Compartments

Columns (X)

Rows (Y)

None With tab

A ledge at the back of each row for a label, for example 12 mm label tape.

None With scoop

Rounded inside at the front – small parts are easy to take out.

Wall and stacking lip

With lip Without

With the lip, bins stack on top of each other.

Wallmm

0.95 mm is usual; 1.2 mm is sturdier.

Base

None Magnets Magnets + screws

For 6 × 2 mm magnets and M3 screws, four per grid unit.

Download

Print with the opening up, no supports needed. Press the magnets into the holes after printing; a drop of glue holds them. 3MF keeps the parts apart and in millimetres. Every slicer opens 3MF and STL.