Miniature box with 12 compartments
7 h 50 min2 parts
Wet palette for miniatures
3D printing2 partsBeginner-friendlyNo supports
A wet palette with lid for painting miniatures. Put a thin damp sponge or kitchen paper in the bottom and a sheet of baking paper on top: acrylic paints then stay workable for hours. Inside it is 120 × 90 × 20 mm, outside 123.2 × 93.2 mm and 22.8 mm high with the lid. With the lid closed, paint you mixed today is often still usable the next day.
Download
The file is made in your browser. We only count how often it is downloaded.
Join in
- Size
- 123.2 × 196.4 × 21.2 mm
- Print time
- ≈ 2 h 11 min
- Filament
- ≈ 61 g PLA
- Parts
- 2
Print settings
- Material
- PLA
- Layer height
- 0.2 mm
- Infill
- 15%
- Walls
- 3
- Supports
- none
Worked for others:
Tip: Print the box with the opening up and the lid with its top face down. No supports needed.
Estimated by our slicer-like calculation for a 0.4 mm nozzle. Your slicer may show slightly different values.
Adjust it
- Outside: 123.2 × 93.2 × 21.2 mm
- Inside: 120 × 90 × 20 mm
- With lid: 22.8 mm high
This model comes from the “Box with lid” generator. Open it there with these settings and change any size you like.
Open in the generatorSimilar models
Miniature box with 12 compartments
Paint pot organizer with 20 compartments
6 h 24 min1 part
Round bases 25 mm for miniatures, 10 pieces
25 min10 parts
Round bases 32 mm for miniatures, 6 pieces
27 min6 parts
Something wrong with this model? Report a problem