Insert for 24 miniatures
6 h 1 min1 part
Paint pot organizer with 20 compartments
3D printing1 partBeginner-friendlyNo supports
A tray with 5 × 4 compartments of about 38 × 38 mm for miniature paints, made for a drawer or box of 200 × 160 mm inside. Pots and dropper bottles up to about 36 mm across stand upright and sorted by colour, so you find the right shade quickly while painting. It prints in one piece and is 40 mm high; for other drawers or larger bottles, enter your inside measurements and the number of compartments in the generator.
Download
The file is made in your browser. We only count how often it is downloaded.
Join in
- Size
- 199 × 159 × 40 mm
- Print time
- ≈ 6 h 24 min
- Filament
- ≈ 164 g PLA
- Parts
- 1
Print settings
- Material
- PLA
- Layer height
- 0.2 mm
- Infill
- 15%
- Walls
- 2
- Supports
- none
Worked for others:
Tip: Print with the opening facing up, no supports needed. If the parts come out a little too wide, increase the clearance.
Estimated by our slicer-like calculation for a 0.4 mm nozzle. Your slicer may show slightly different values.
Adjust it
- Organizer: 199 × 159 × 40 mm
- Each compartment inside: 38.36 × 38.25 × 38.8 mm
This model comes from the “Drawer organizer” generator. Open it there with these settings and change any size you like.
Open in the generatorSimilar models
Insert for 24 miniatures
Miniature box with 12 compartments
7 h 50 min2 parts
Round bases 25 mm for miniatures, 10 pieces
25 min10 parts
Round bases 32 mm for miniatures, 6 pieces
27 min6 parts
Something wrong with this model? Report a problem