Round bases 25 mm for miniatures, 10 pieces
25 min10 parts
Round bases 32 mm for miniatures, 6 pieces
3D printing6 partsBeginner-friendlyNo supports
Six round bases, 32 mm across and 4 mm high with a bevelled edge, the size many current tabletop games use for infantry and heroes. They give single figures a steady stand, and their flat top is ready for texture paste, cork, stones or tufts of grass. Glue the miniature on with superglue before you texture the base; for magnets underneath, drill a shallow hole or set a thicker base in the generator.
Download
The file is made in your browser. We only count how often it is downloaded.
Join in
- Size
- 32 × 32 × 4 mm
- Print time
- ≈ 27 min
- Filament
- ≈ 14 g PLA
- Parts
- 6
Print settings
- Material
- PLA
- Layer height
- 0.2 mm
- Infill
- 15%
- Walls
- 2
- Supports
- none
Worked for others:
Tip: Print standing upright as shown, no supports needed. For washers under 1 mm use a layer height of 0.1–0.2 mm. The STL holds all pieces; in the 3MF each piece is its own object.
Estimated by our slicer-like calculation for a 0.4 mm nozzle. Your slicer may show slightly different values.
Adjust it
- Outside 32 mm, no hole, 4 mm high
- Pieces: 6
This model comes from the “Spacer” generator. Open it there with these settings and change any size you like.
Open in the generatorSimilar models
Round bases 25 mm for miniatures, 10 pieces
Round bases 40 mm for miniatures, 4 pieces
27 min4 parts
Hexagonal bases 25 mm, 10 pieces
28 min10 parts
Painting handle for miniatures
37 min1 part
Something wrong with this model? Report a problem