Wet palette for miniatures
2 h 11 min2 parts
Miniature box with 12 compartments
3D printing2 partsBeginner-friendlyNo supports
A box with lid for tabletop and painted miniatures, 180 × 120 × 50 mm inside and divided into 4 × 3 compartments of about 44 × 39 mm. Figures in 28 to 32 mm scale stand separately on their bases, so painted surfaces don't rub against each other on the way to the gaming table. Line the compartments with a little foam for extra protection; for larger models, set fewer compartments in the generator.
Download
The file is made in your browser. We only count how often it is downloaded.
Join in
- Size
- 183.2 × 256.4 × 51.2 mm
- Print time
- ≈ 7 h 50 min
- Filament
- ≈ 205 g PLA
- Parts
- 2
Print settings
- Material
- PLA
- Layer height
- 0.2 mm
- Infill
- 15%
- Walls
- 2
- Supports
- none
Worked for others:
Tip: Print the box with the opening up and the lid with its top face down. No supports needed.
Estimated by our slicer-like calculation for a 0.4 mm nozzle. Your slicer may show slightly different values.
Adjust it
- Outside: 183.2 × 123.2 × 51.2 mm
- Inside: 180 × 120 × 50 mm
- With lid: 52.8 mm high
- Each compartment: 43.8 × 38.93 mm, 43.4 mm deep
This model comes from the “Box with lid” generator. Open it there with these settings and change any size you like.
Open in the generatorSimilar models
Wet palette for miniatures
Paint pot organizer with 20 compartments
6 h 24 min1 part
Round bases 25 mm for miniatures, 10 pieces
25 min10 parts
Round bases 32 mm for miniatures, 6 pieces
27 min6 parts
Something wrong with this model? Report a problem