Round bases 32 mm for miniatures, 6 pieces
27 min6 parts
Round bases 25 mm for miniatures, 10 pieces
3D printing10 partsBeginner-friendlyNo supports
Ten round bases, 25 mm across and 3 mm high with a bevelled top edge, for tabletop and board game miniatures. Glue on figures that have lost their base, rebase old models or make spare tokens and objective markers; the flat top takes texture paste, sand or flock well. Print with a fine layer height for a smooth bevel, and set 28, 30 or 32 mm in the generator if your game uses other base sizes.
Download
The file is made in your browser. We only count how often it is downloaded.
Join in
- Size
- 25 × 25 × 3 mm
- Print time
- ≈ 25 min
- Filament
- ≈ 13 g PLA
- Parts
- 10
Print settings
- Material
- PLA
- Layer height
- 0.2 mm
- Infill
- 15%
- Walls
- 2
- Supports
- none
Worked for others:
Tip: Print standing upright as shown, no supports needed. For washers under 1 mm use a layer height of 0.1–0.2 mm. The STL holds all pieces; in the 3MF each piece is its own object.
Estimated by our slicer-like calculation for a 0.4 mm nozzle. Your slicer may show slightly different values.
Adjust it
- Outside 25 mm, no hole, 3 mm high
- Pieces: 10
This model comes from the “Spacer” generator. Open it there with these settings and change any size you like.
Open in the generatorSimilar models
Round bases 32 mm for miniatures, 6 pieces
Round bases 40 mm for miniatures, 4 pieces
27 min4 parts
Hexagonal bases 25 mm, 10 pieces
28 min10 parts
Painting handle for miniatures
37 min1 part
Something wrong with this model? Report a problem