Desk edge cable holder
9 min1 part
Wall pen holder with five slots
3D printing1 partBeginner-friendlyNo supports
A slim row of five cups that keeps pens, pencils and markers at hand on the wall, the side of the desk or next to the whiteboard. Each cup takes pens up to 14 mm thick and is 35 mm high, and the flat back sticks on with mounting tape, no drilling needed. At only 20 mm deep it hardly takes up any space. 105 × 20 × 35 mm.
Download
The file is made in your browser. We only count how often it is downloaded.
Join in
- Size
- 104.7 × 19.54 × 35 mm
- Print time
- ≈ 1 h 10 min
- Filament
- ≈ 28 g PLA
- Parts
- 1
Print settings
- Material
- PLA
- Layer height
- 0.2 mm
- Infill
- 20%
- Walls
- 3
- Supports
- none
Worked for others:
Tip: Print standing up as shown, without supports. PETG is best for clips: it bends without breaking. 3 walls (perimeters) and 20 % infill.
Estimated by our slicer-like calculation for a 0.4 mm nozzle. Your slicer may show slightly different values.
Adjust it
- Size: 104.7 mm long, 19.5 mm deep, 35 mm high
- Holders: 5 for 14 mm
- Closed ring: slide in from above
- With base, drain hole 5.5 mm
- Distance from wall: 0 mm
This model comes from the “Wall holder for round things” generator. Open it there with these settings and change any size you like.
Open in the generatorSimilar models
Desk edge cable holder
Stick-on bag hook for the desk
31 min1 part
Cable clip for thick desk edges 40 mm
10 min1 part
Sign “Back in a minute”
12 min2 parts
Something wrong with this model? Report a problem