Desk edge cable holder
9 min1 part
Cable clip for thick desk edges 40 mm
3D printing1 partBeginner-friendlyNo supports
A clip that slides onto desk tops up to 40 mm thick, such as solid wood or height-adjustable desks, and holds two cables up to 8 mm. It keeps power leads and the laptop charger at the edge instead of letting them slide behind the desk, without screws or glue. Measure your desk top before printing; the clamp should sit slightly tight, and for other thicknesses or cables you change the values in the generator.
Download
The file is made in your browser. We only count how often it is downloaded.
Join in
- Size
- 33 × 53.69 × 10 mm
- Print time
- ≈ 10 min
- Filament
- ≈ 3.7 g PETG
- Parts
- 1
Print settings
- Material
- PETG
- Layer height
- 0.2 mm
- Infill
- 15%
- Walls
- 2
- Supports
- none
Worked for others:
Tip: Print lying on its side as shown, no supports needed. PLA and PETG both work; PETG bends more easily.
Estimated by our slicer-like calculation for a 0.4 mm nozzle. Your slicer may show slightly different values.
Adjust it
- Size: 33 mm long, 53.69 mm high, 10 mm wide
- Cables: 2 × 8 mm
- Opening to clip in: 6 mm
- For tabletops 40 mm thick
This model comes from the “Cable clip” generator. Open it there with these settings and change any size you like.
Open in the generatorSimilar models
Desk edge cable holder
Stick-on bag hook for the desk
31 min1 part
Sign “Back in a minute”
12 min2 parts
Business card box with lid
1 h 50 min2 parts
Something wrong with this model? Report a problem