Desk edge cable holder
9 min1 part
Sign “Back in a minute”
3D printing2 partsBeginner-friendlyNo supports
A sign in two lines, “Back in a minute”, with 10 mm raised letters and a hole at the top for hanging. It goes on the office door, the counter of a small shop or the workshop door when you step away briefly, so visitors know you'll be right back. Thread a cord or ribbon through the hole or hang it on a small hook; for other messages, change the text in the generator.
Download
The file is made in your browser. We only count how often it is downloaded.
Join in
- Size
- 63.13 × 41.38 × 3.6 mm
- Print time
- ≈ 12 min
- Filament
- ≈ 5.6 g PLA
- Parts
- 2
Print settings
- Material
- PLA
- Layer height
- 0.2 mm
- Infill
- 15%
- Walls
- 2
- Supports
- none
Worked for others:
Tip: Print flat as shown, no supports. STL: one piece in one colour. 3MF: sign and lettering as two parts – give each a colour in the slicer. SVG: red is cut, black is engraved.
Estimated by our slicer-like calculation for a 0.4 mm nozzle. Your slicer may show slightly different values.
Adjust it
- Size: 63.13 × 41.38 mm, 3.6 mm thick
- Second colour: change filament at 2.4 mm height
This model comes from the “Sign and keychain” generator. Open it there with these settings and change any size you like.
Open in the generatorSimilar models
Desk edge cable holder
Stick-on bag hook for the desk
31 min1 part
Cable clip for thick desk edges 40 mm
10 min1 part
Business card box with lid
1 h 50 min2 parts
Something wrong with this model? Report a problem