Spool adapter 52 to 30 mm
40 min2 parts
TPU feet for the 3D printer
3D printing4 partsNo supports
Four soft feet for under your 3D printer, printed in TPU: they damp vibrations, so the printer runs quieter on a wooden desk or shelf. Each foot is 40 mm across and 12 mm high, with chamfered edges. Put one under each corner of the printer. With low infill they stay soft; print TPU slowly.
Download
The file is made in your browser. We only count how often it is downloaded.
Join in
- Size
- 40 × 40 × 12 mm
- Print time
- ≈ 48 min
- Filament
- ≈ 25 g TPU
- Parts
- 4
Print settings
- Material
- TPU
- Layer height
- 0.2 mm
- Infill
- 15%
- Walls
- 2
- Supports
- none
Worked for others:
Tip: Print standing upright as shown, no supports needed. For washers under 1 mm use a layer height of 0.1–0.2 mm. The STL holds all pieces; in the 3MF each piece is its own object.
Estimated by our slicer-like calculation for a 0.4 mm nozzle. Your slicer may show slightly different values.
Adjust it
- Outside 40 mm, no hole, 12 mm high
- Pieces: 4
This model comes from the “Spacer” generator. Open it there with these settings and change any size you like.
Open in the generatorSimilar models
Spool adapter 52 to 30 mm
Filament label “PLA”
4 min2 parts
Nozzle box with 8 compartments
57 min2 parts
Glue stick holder for the 3D printer
52 min1 part
Something wrong with this model? Report a problem