TPU feet for the 3D printer
48 min4 parts
Spool adapter 52 to 30 mm
3D printing2 partsBeginner-friendlyNo supports
Two adapter rings that centre a filament spool on a thin spool holder: they fit into spool holes from 52 mm and onto holders up to 30 mm. Each ring is 52 mm across and 15 mm high, with a 30.5 mm hole; push one into each side of the spool. The spool then runs true instead of wobbling, and the filament feeds more evenly. If your sizes differ, change the values in the generator.
Download
The file is made in your browser. We only count how often it is downloaded.
Join in
- Size
- 52 × 52 × 15 mm
- Print time
- ≈ 40 min
- Filament
- ≈ 20 g PLA
- Parts
- 2
Print settings
- Material
- PLA
- Layer height
- 0.2 mm
- Infill
- 15%
- Walls
- 2
- Supports
- none
Worked for others:
Tip: Print standing upright as shown, no supports needed. For washers under 1 mm use a layer height of 0.1–0.2 mm. The STL holds all pieces; in the 3MF each piece is its own object.
Estimated by our slicer-like calculation for a 0.4 mm nozzle. Your slicer may show slightly different values.
Adjust it
- Outside 52 mm, hole 30.5 mm, 15 mm high
- Wall: 10.75 mm
- Pieces: 2
This model comes from the “Spacer” generator. Open it there with these settings and change any size you like.
Open in the generatorSimilar models
TPU feet for the 3D printer
Filament label “PLA”
4 min2 parts
Nozzle box with 8 compartments
57 min2 parts
Glue stick holder for the 3D printer
52 min1 part
Something wrong with this model? Report a problem