Filament label “PLA”
4 min2 parts
Nozzle box with 8 compartments
3D printing2 partsBeginner-friendlyNo supports
Spare 3D printer nozzles get eight compartments in this small box with lid, 60 × 40 × 20 mm inside. Common nozzles with M6 thread fit standing or lying down, so the box can sit next to the printer together with the tools you need to swap nozzles. Use the four columns for the sizes from 0.2 to 0.8 mm and the two rows for brass and hardened steel, and you always pick the right one.
Download
Calculated in your browser. Nothing is uploaded.
- Size
- 63.2 × 96.4 × 21.2 mm
- Print time
- ≈ 57 min
- Filament
- ≈ 24 g PLA
- Parts
- 2
Print settings
- Material
- PLA
- Layer height
- 0.2 mm
- Infill
- 15%
- Walls
- 2
- Supports
- none
Tip: Print the box with the opening up and the lid with its top face down. No supports needed.
Estimated by our slicer-like calculation for a 0.4 mm nozzle. Your slicer may show slightly different values.
Adjust it
- Outside: 63.2 × 43.2 × 21.2 mm
- Inside: 60 × 40 × 20 mm
- With lid: 22.8 mm high
- Each compartment: 13.8 × 19.2 mm, 13.4 mm deep
This model comes from the “Box with lid” generator. Open it there with these settings and change any size you like.
Open in the generatorSimilar models
Filament label “PLA”
Round tolerance test 10 mm
14 min2 parts
Square tolerance test 10 mm
14 min2 parts
Screw box with 6 compartments
3 h 28 min2 parts
Something wrong with this model? Report a problem