Nozzle box with 8 compartments
57 min2 parts
Filament label “PLA”
3D printing2 partsBeginner-friendlyNo supports
A small filament label with “PLA” in 10 mm raised letters and a hole on the left for hanging. Hang it on a spool, a dry box or the shelf where your filament waits, so you can tell materials apart even when the colours look alike. Print each label from the filament it names, so it shows the colour too, and fix it with a cable tie or a bent piece of filament; for PETG or TPU, change the text in the generator.
Download
Calculated in your browser. Nothing is uploaded.
Join in
- Size
- 39.42 × 16 × 3.6 mm
- Print time
- ≈ 4 min
- Filament
- ≈ 1.5 g PLA
- Parts
- 2
Print settings
- Material
- PLA
- Layer height
- 0.2 mm
- Infill
- 15%
- Walls
- 2
- Supports
- none
Worked for others:
Tip: Print flat as shown, no supports. STL: one piece in one colour. 3MF: sign and lettering as two parts – give each a colour in the slicer. SVG: red is cut, black is engraved.
Estimated by our slicer-like calculation for a 0.4 mm nozzle. Your slicer may show slightly different values.
Adjust it
- Size: 39.42 × 16 mm, 3.6 mm thick
- Second colour: change filament at 2.4 mm height
This model comes from the “Sign and keychain” generator. Open it there with these settings and change any size you like.
Open in the generatorSimilar models
Nozzle box with 8 compartments
Round tolerance test 10 mm
14 min2 parts
Square tolerance test 10 mm
14 min2 parts
Herb label
4 min2 parts
Something wrong with this model? Report a problem