Spray bottle holder for the 3D printer
1 h 9 min1 part
Glue stick holder for the 3D printer
3D printing1 partBeginner-friendlyNo supports
Two cups that keep glue sticks right next to the 3D printer, so they are at hand before every print on a glass or smooth bed. They take sticks up to 30 mm thick, which stand in the 30 mm high cups, and the flat back sticks on the printer frame, the enclosure or the wall with mounting tape. 76 × 36 × 30 mm.
Download
The file is made in your browser. We only count how often it is downloaded.
Join in
- Size
- 76.4 × 35.7 × 30 mm
- Print time
- ≈ 52 min
- Filament
- ≈ 21 g PLA
- Parts
- 1
Print settings
- Material
- PLA
- Layer height
- 0.2 mm
- Infill
- 20%
- Walls
- 3
- Supports
- none
Worked for others:
Tip: Print standing up as shown, without supports. PETG is best for clips: it bends without breaking. 3 walls (perimeters) and 20 % infill.
Estimated by our slicer-like calculation for a 0.4 mm nozzle. Your slicer may show slightly different values.
Adjust it
- Size: 76.4 mm long, 35.7 mm deep, 30 mm high
- Holders: 2 for 30 mm
- Closed ring: slide in from above
- With base, drain hole 12 mm
- Distance from wall: 0 mm
This model comes from the “Wall holder for round things” generator. Open it there with these settings and change any size you like.
Open in the generatorSimilar models
Spray bottle holder for the 3D printer
Filament label “PLA”
4 min2 parts
Nozzle box with 8 compartments
57 min2 parts
Round tolerance test 10 mm
14 min2 parts
Something wrong with this model? Report a problem