Hair dryer holder for the wall
49 min1 part
Toothbrush holder for four brushes
3D printing1 partBeginner-friendlyNo supports
A row of four cups for the bathroom wall or mirror cabinet that keeps toothbrushes upright and apart from each other. Each cup takes handles up to 18 mm and is 30 mm high, and a 7 mm hole in the base lets water drain so nothing stays wet. It sticks on with waterproof mounting tape, no drilling needed. 103 × 24 × 30 mm; print it in PETG and rinse it now and then.
Download
The file is made in your browser. We only count how often it is downloaded.
Join in
- Size
- 103.32 × 23.58 × 30 mm
- Print time
- ≈ 1 h 2 min
- Filament
- ≈ 25 g PETG
- Parts
- 1
Print settings
- Material
- PETG
- Layer height
- 0.2 mm
- Infill
- 20%
- Walls
- 3
- Supports
- none
Worked for others:
Tip: Print standing up as shown, without supports. PETG is best for clips: it bends without breaking. 3 walls (perimeters) and 20 % infill.
Estimated by our slicer-like calculation for a 0.4 mm nozzle. Your slicer may show slightly different values.
Adjust it
- Size: 103.3 mm long, 23.6 mm deep, 30 mm high
- Holders: 4 for 18 mm
- Closed ring: slide in from above
- With base, drain hole 7 mm
- Distance from wall: 0 mm
This model comes from the “Wall holder for round things” generator. Open it there with these settings and change any size you like.
Open in the generatorSimilar models
Hair dryer holder for the wall
Jewellery box with 6 compartments
2 h 34 min2 parts
Box for 10 AA batteries
2 h 32 min2 parts
Cosmetics drawer organizer
4 h 38 min1 part
Something wrong with this model? Report a problem