Box for 10 AA batteries
2 h 32 min2 parts
Jewellery box with 6 compartments
3D printing2 partsBeginner-friendlyNo supports
A small jewellery box with lid and rounded corners, 100 × 70 × 35 mm inside, with six compartments in two rows. Rings, earrings and a folded necklace each get their own place on the dresser or in a drawer, and they stay apart when you take the box on a trip. Glue a small piece of felt or velvet into each compartment, so nothing rattles and the jewellery is less likely to get scratched.
Download
Calculated in your browser. Nothing is uploaded.
Join in
- Size
- 103.2 × 156.4 × 36.2 mm
- Print time
- ≈ 2 h 34 min
- Filament
- ≈ 66 g PLA
- Parts
- 2
Print settings
- Material
- PLA
- Layer height
- 0.2 mm
- Infill
- 15%
- Walls
- 2
- Supports
- none
Worked for others:
Tip: Print the box with the opening up and the lid with its top face down. No supports needed.
Estimated by our slicer-like calculation for a 0.4 mm nozzle. Your slicer may show slightly different values.
Adjust it
- Outside: 103.2 × 73.2 × 36.2 mm
- Inside: 100 × 70 × 35 mm
- With lid: 37.8 mm high
- Each compartment: 32.27 × 34.2 mm, 28.4 mm deep
This model comes from the “Box with lid” generator. Open it there with these settings and change any size you like.
Open in the generatorSimilar models
Box for 10 AA batteries
Cosmetics drawer organizer
4 h 38 min1 part
Jewellery drawer organizer, 24 compartments
3 h 16 min1 part
Door sign “Do not disturb”
13 min2 parts
Something wrong with this model? Report a problem