Jewellery box with 6 compartments
2 h 34 min2 parts
Box for 10 AA batteries
3D printing2 partsBeginner-friendlyNo supports
A box with lid that holds ten AA batteries standing upright, each in its own compartment, 84 × 33 × 57 mm inside. The lid closes right over the cells, so spare batteries for remote controls, toys and lights stay together in one place in the drawer. With rechargeable cells, put the charged ones in plus pole up and the empty ones plus pole down, so you can see at a glance which are ready.
Download
Calculated in your browser. Nothing is uploaded.
- Size
- 87.2 × 82.4 × 58.2 mm
- Print time
- ≈ 2 h 32 min
- Filament
- ≈ 61 g PLA
- Parts
- 2
Print settings
- Material
- PLA
- Layer height
- 0.2 mm
- Infill
- 15%
- Walls
- 2
- Supports
- none
Tip: Print the box with the opening up and the lid with its top face down. No supports needed.
Estimated by our slicer-like calculation for a 0.4 mm nozzle. Your slicer may show slightly different values.
Adjust it
- Outside: 87.2 × 36.2 × 58.2 mm
- Inside: 84 × 33 × 57 mm
- With lid: 59.8 mm high
- Each compartment: 15.52 × 15.7 mm, 50.4 mm deep
This model comes from the “Box with lid” generator. Open it there with these settings and change any size you like.
Open in the generatorSimilar models
Jewellery box with 6 compartments
Cosmetics drawer organizer
4 h 38 min1 part
Jewellery drawer organizer, 24 compartments
3 h 16 min1 part
Door sign “Do not disturb”
13 min2 parts
Something wrong with this model? Report a problem