Toothbrush holder for four brushes
1 h 2 min1 part
Hair dryer holder for the wall
3D printing1 partBeginner-friendlyNo supports
A ring for the bathroom wall that holds your hair dryer: put the nozzle through from above and the dryer rests on the ring, ready to hand and off the shelf. It takes nozzles up to 55 mm thick, which suits most dryers, and sits 10 mm from the wall. Measure your dryer first and fix the ring with two 4 mm screws. 88 × 74 × 25 mm; print it in PETG, which copes better with warmth.
Download
The file is made in your browser. We only count how often it is downloaded.
Join in
- Size
- 87.95 × 73.95 × 25 mm
- Print time
- ≈ 49 min
- Filament
- ≈ 22 g PETG
- Parts
- 1
Print settings
- Material
- PETG
- Layer height
- 0.2 mm
- Infill
- 20%
- Walls
- 3
- Supports
- none
Worked for others:
Tip: Print standing up as shown, without supports. PETG is best for clips: it bends without breaking. 3 walls (perimeters) and 20 % infill.
Estimated by our slicer-like calculation for a 0.4 mm nozzle. Your slicer may show slightly different values.
Adjust it
- Size: 88 mm long, 74 mm deep, 25 mm high
- Holders: 1 for 55 mm
- Closed ring: slide in from above
- Distance from wall: 10 mm
- 2 holes for screws up to 4 mm, 76 mm apart
This model comes from the “Wall holder for round things” generator. Open it there with these settings and change any size you like.
Open in the generatorSimilar models
Toothbrush holder for four brushes
Jewellery box with 6 compartments
2 h 34 min2 parts
Box for 10 AA batteries
2 h 32 min2 parts
Cosmetics drawer organizer
4 h 38 min1 part
Something wrong with this model? Report a problem