Jewellery drawer organizer, 24 compartments
3 h 16 min1 part
Cosmetics drawer organizer
3D printing1 partBeginner-friendlyNo supports
This drawer organizer sorts make-up and cosmetics into 3 × 2 compartments, 50 mm high, and fits a drawer of 200 × 120 mm inside. Lipsticks and nail polish stand upright in the compartments, and hair ties, clips and cotton pads no longer wander around the drawer. It prints in one piece, and the inside corners are rounded with 5 mm, so powder and dust are easy to wipe out with a damp cloth.
Download
Calculated in your browser. Nothing is uploaded.
Join in
- Size
- 199 × 119 × 50 mm
- Print time
- ≈ 4 h 38 min
- Filament
- ≈ 118 g PLA
- Parts
- 1
Print settings
- Material
- PLA
- Layer height
- 0.2 mm
- Infill
- 15%
- Walls
- 2
- Supports
- none
Worked for others:
Tip: Print with the opening facing up, no supports needed. If the parts come out a little too wide, increase the clearance.
Estimated by our slicer-like calculation for a 0.4 mm nozzle. Your slicer may show slightly different values.
Adjust it
- Organizer: 199 × 119 × 50 mm
- Each compartment inside: 64.73 × 57.7 × 48.8 mm
This model comes from the “Drawer organizer” generator. Open it there with these settings and change any size you like.
Open in the generatorSimilar models
Jewellery drawer organizer, 24 compartments
Jewellery box with 6 compartments
2 h 34 min2 parts
Box for 10 AA batteries
2 h 32 min2 parts
Door sign “Do not disturb”
13 min2 parts
Something wrong with this model? Report a problem