Charging cable holder for 3 cables
5 min1 part
Stick-on clip for fairy lights
3D printing1 partBeginner-friendlyNo supports
A small stick-on clip for one cable up to 3 mm, such as the wire of fairy lights or an LED string, only 8 mm wide so it hardly shows. A row of them guides the lights neatly along a window frame, a shelf edge, a headboard or the balcony railing, without nails or tape across the wire. Clean the surface first, stick each clip on with a small piece of double-sided tape and press the wire in; for thicker cables, set the diameter in the generator.
Download
The file is made in your browser. We only count how often it is downloaded.
Join in
- Size
- 10.4 × 6.83 × 8 mm
- Print time
- ≈ 4 min
- Filament
- ≈ 0.4 g PETG
- Parts
- 1
Print settings
- Material
- PETG
- Layer height
- 0.2 mm
- Infill
- 15%
- Walls
- 2
- Supports
- none
Worked for others:
Tip: Print lying on its side as shown, no supports needed. PLA and PETG both work; PETG bends more easily.
Estimated by our slicer-like calculation for a 0.4 mm nozzle. Your slicer may show slightly different values.
Adjust it
- Size: 10.4 mm long, 6.83 mm high, 8 mm wide
- Cables: 1 × 3 mm
- Opening to clip in: 2.25 mm
This model comes from the “Cable clip” generator. Open it there with these settings and change any size you like.
Open in the generatorSimilar models
Charging cable holder for 3 cables
Power cable clip 8 mm
6 min1 part
Clip for thick cables 14 mm
12 min1 part
Cable clip for 6 cables
10 min1 part
Something wrong with this model? Report a problem