Broom holder for the wall
23 min1 part
Spray can holder for two cans
3D printing1 partBeginner-friendlyNo supports
Two cups for the wall that hold spray cans – penetrating oil, paint, chain spray or cleaner – in the workshop, garage or bike cellar. They fit standard cans up to 66 mm in diameter, which you simply drop in from above, and a 26 mm hole in each base lets drips run out. The 40 mm high cups hold the cans securely; fix the holder with two 4 mm screws. 172 × 73 × 40 mm.
Download
The file is made in your browser. We only count how often it is downloaded.
Join in
- Size
- 172.12 × 72.56 × 40 mm
- Print time
- ≈ 2 h 39 min
- Filament
- ≈ 68 g PLA
- Parts
- 1
Print settings
- Material
- PLA
- Layer height
- 0.2 mm
- Infill
- 20%
- Walls
- 3
- Supports
- none
Worked for others:
Tip: Print standing up as shown, without supports. PETG is best for clips: it bends without breaking. 3 walls (perimeters) and 20 % infill.
Estimated by our slicer-like calculation for a 0.4 mm nozzle. Your slicer may show slightly different values.
Adjust it
- Size: 172.1 mm long, 72.6 mm deep, 40 mm high
- Holders: 2 for 66 mm
- Closed ring: slide in from above
- With base, drain hole 26.5 mm
- Distance from wall: 0 mm
- 2 holes for screws up to 4 mm, 160.1 mm apart
This model comes from the “Wall holder for round things” generator. Open it there with these settings and change any size you like.
Open in the generatorSimilar models
Broom holder for the wall
Torch holder for the wall
16 min1 part
Shower head holder to stick on
21 min1 part
Headphone holder
55 min1 part
Something wrong with this model? Report a problem