Torch holder for the wall
16 min1 part
Broom holder for the wall
3D printing1 partBeginner-friendlyNo supports
A simple clip that holds a broom, mop or squeegee upright on the wall by its handle, so it no longer falls over in the corner. It fits handles of 24 mm, the most common size, which snap in through a 21 mm opening. The clip sits 10 mm from the wall and is fixed with two 4 mm screws. 56 × 35 × 25 mm; print it in PETG so it bends without breaking.
Download
The file is made in your browser. We only count how often it is downloaded.
Join in
- Size
- 55.64 × 34.6 × 25 mm
- Print time
- ≈ 23 min
- Filament
- ≈ 9.2 g PETG
- Parts
- 1
Print settings
- Material
- PETG
- Layer height
- 0.2 mm
- Infill
- 20%
- Walls
- 3
- Supports
- none
Worked for others:
Tip: Print standing up as shown, without supports. PETG is best for clips: it bends without breaking. 3 walls (perimeters) and 20 % infill.
Estimated by our slicer-like calculation for a 0.4 mm nozzle. Your slicer may show slightly different values.
Adjust it
- Size: 55.6 mm long, 34.6 mm deep, 25 mm high
- Holders: 1 for 24 mm
- Opening to clip in: 20.9 mm
- Distance from wall: 10 mm
- 2 holes for screws up to 4 mm, 43.6 mm apart
This model comes from the “Wall holder for round things” generator. Open it there with these settings and change any size you like.
Open in the generatorSimilar models
Torch holder for the wall
Spray can holder for two cans
2 h 39 min1 part
Shower head holder to stick on
21 min1 part
Headphone holder
55 min1 part
Something wrong with this model? Report a problem