Broom holder for the wall
23 min1 part
Shower head holder to stick on
3D printing1 partBeginner-friendlyNo supports
A ring for the tiles that holds a hand shower: drop the handle in from above and its thicker upper end rests in the ring. It suits handles that are thinner than 26 mm at the bottom and get thicker towards the head, and it sits 15 mm from the wall so the hose has room. It sticks on with waterproof mounting tape, ideal where you can't drill. 38 × 49 × 20 mm; print it in PETG.
Download
The file is made in your browser. We only count how often it is downloaded.
Join in
- Size
- 37.66 × 48.66 × 20 mm
- Print time
- ≈ 21 min
- Filament
- ≈ 9 g PETG
- Parts
- 1
Print settings
- Material
- PETG
- Layer height
- 0.2 mm
- Infill
- 20%
- Walls
- 3
- Supports
- none
Worked for others:
Tip: Print standing up as shown, without supports. PETG is best for clips: it bends without breaking. 3 walls (perimeters) and 20 % infill.
Estimated by our slicer-like calculation for a 0.4 mm nozzle. Your slicer may show slightly different values.
Adjust it
- Size: 37.7 mm long, 48.7 mm deep, 20 mm high
- Holders: 1 for 26 mm
- Closed ring: slide in from above
- Distance from wall: 15 mm
This model comes from the “Wall holder for round things” generator. Open it there with these settings and change any size you like.
Open in the generatorSimilar models
Broom holder for the wall
Torch holder for the wall
16 min1 part
Spray can holder for two cans
2 h 39 min1 part
Headphone holder
55 min1 part
Something wrong with this model? Report a problem