Jewellery box with 6 compartments
2 h 34 min2 parts
Soap dish with ribs
3D printing2 partsBeginner-friendlyNo supports
A square soap dish for the sink or the shower. The soap rests on 3 mm high ribs, so it dries off and doesn't stick, and the 6 mm rim catches the water – pour it out now and then. At 100 × 100 mm it holds large bars of soap and also suits a sponge or a dish brush. It is 8.4 mm high; print it in PETG, which copes better with warm water.
Download
The file is made in your browser. We only count how often it is downloaded.
Join in
- Size
- 100 × 100 × 8.4 mm
- Print time
- ≈ 1 h 21 min
- Filament
- ≈ 39 g PETG
- Parts
- 2
Print settings
- Material
- PETG
- Layer height
- 0.2 mm
- Infill
- 15%
- Walls
- 2
- Supports
- none
Worked for others:
Tip: Print flat as shown, no supports. For two colours, change filament at the height shown (in the slicer: colour change at that layer), or load the 3MF and give the pattern its own colour. PLA works well; wipe the coaster with a damp cloth – it is not for the dishwasher.
Estimated by our slicer-like calculation for a 0.4 mm nozzle. Your slicer may show slightly different values.
Adjust it
- Size: 100 × 100 mm, 8.4 mm high
- Base: 2.4 mm
- Rim: 3 mm wide, 6 mm high, 94 mm inside
- Second colour: change filament at 2.4 mm height
This model comes from the “Coaster” generator. Open it there with these settings and change any size you like.
Open in the generatorSimilar models
Jewellery box with 6 compartments
Box for 10 AA batteries
2 h 32 min2 parts
Cosmetics drawer organizer
4 h 38 min1 part
Jewellery drawer organizer, 24 compartments
3 h 16 min1 part
Something wrong with this model? Report a problem