Cosmetics drawer organizer
4 h 38 min1 part
Jewellery drawer organizer, 24 compartments
3D printing1 partBeginner-friendlyNo supports
A flat drawer organizer with 24 small compartments for rings, earrings and other jewellery, 20 mm high and made for a drawer of 180 × 120 mm inside. Every ring and every pair of earrings gets its own place, so nothing gets tangled and you see everything at a glance when you open the drawer. Print it in black or dark blue: silver and gold stand out better against it.
Download
Calculated in your browser. Nothing is uploaded.
- Size
- 179 × 119 × 20 mm
- Print time
- ≈ 3 h 16 min
- Filament
- ≈ 85 g PLA
- Parts
- 1
Print settings
- Material
- PLA
- Layer height
- 0.2 mm
- Infill
- 15%
- Walls
- 2
- Supports
- none
Tip: Print with the opening facing up, no supports needed. If the parts come out a little too wide, increase the clearance.
Estimated by our slicer-like calculation for a 0.4 mm nozzle. Your slicer may show slightly different values.
Adjust it
- Organizer: 179 × 119 × 20 mm
- Each compartment inside: 28.43 × 28.25 × 18.8 mm
This model comes from the “Drawer organizer” generator. Open it there with these settings and change any size you like.
Open in the generatorSimilar models
Cosmetics drawer organizer
Jewellery box with 6 compartments
2 h 34 min2 parts
Box for 10 AA batteries
2 h 32 min2 parts
Door sign “Do not disturb”
13 min2 parts
Something wrong with this model? Report a problem