Key tag “Home”
4 min2 parts
Shims for wobbly furniture, 8 pieces
3D printing8 partsBeginner-friendlyNo supports
Eight round shims, 30 mm across and 2 mm thick, to stop tables, shelves, washing machines or flower pots from wobbling on uneven floors. Slide one or two under the short leg until the piece stands firmly; with two colours you can tell at a glance how many are stacked. For tiled floors with deep joints, print thicker shims in the generator, and use PETG under the washing machine, which copes better with vibration and moisture.
Download
The file is made in your browser. We only count how often it is downloaded.
Join in
- Size
- 30 × 30 × 2 mm
- Print time
- ≈ 25 min
- Filament
- ≈ 13 g PLA
- Parts
- 8
Print settings
- Material
- PLA
- Layer height
- 0.2 mm
- Infill
- 15%
- Walls
- 2
- Supports
- none
Worked for others:
Tip: Print standing upright as shown, no supports needed. For washers under 1 mm use a layer height of 0.1–0.2 mm. The STL holds all pieces; in the 3MF each piece is its own object.
Estimated by our slicer-like calculation for a 0.4 mm nozzle. Your slicer may show slightly different values.
Adjust it
- Outside 30 mm, no hole, 2 mm high
- Pieces: 8
This model comes from the “Spacer” generator. Open it there with these settings and change any size you like.
Open in the generatorSimilar models
Key tag “Home”
Luggage tag
7 min2 parts
Weekly pill box with 7 compartments
1 h 28 min2 parts
Coin box with 4 compartments
1 h 37 min2 parts
Something wrong with this model? Report a problem