Key tag “Home”
4 min2 parts
Weekly pill box with 7 compartments
3D printing2 partsBeginner-friendlyNo supports
A slim pill box with seven compartments, one for each day of the week, under a single lid – 154 × 30 × 25 mm inside. The lid's rim is only 2 mm high, so the dividers reach almost up to the lid and help keep each day's pills apart. Print it in a light colour and write the days on the front with a permanent marker, starting on the left.
Download
Calculated in your browser. Nothing is uploaded.
Join in
- Size
- 156.4 × 74.8 × 26.2 mm
- Print time
- ≈ 1 h 28 min
- Filament
- ≈ 38 g PLA
- Parts
- 2
Print settings
- Material
- PLA
- Layer height
- 0.2 mm
- Infill
- 15%
- Walls
- 2
- Supports
- none
Worked for others:
Tip: Print the box with the opening up and the lid with its top face down. No supports needed.
Estimated by our slicer-like calculation for a 0.4 mm nozzle. Your slicer may show slightly different values.
Adjust it
- Outside: 156.4 × 32.4 × 26.2 mm
- Inside: 154 × 30 × 25 mm
- With lid: 27.8 mm high
- Each compartment: 20.97 × 30 mm, 22.4 mm deep
This model comes from the “Box with lid” generator. Open it there with these settings and change any size you like.
Open in the generatorSimilar models
Key tag “Home”
Luggage tag
7 min2 parts
Screw box with 6 compartments
3 h 28 min2 parts
Gridfinity bin 1 × 1
37 min1 part
Something wrong with this model? Report a problem