Weekly pill box with 7 compartments
1 h 28 min2 parts
Coin box with 4 compartments
3D printing2 partsBeginner-friendlyNo supports
A small box with lid for loose change, 120 × 32 × 30 mm inside and divided into four compartments of about 29 × 32 mm. Even the biggest euro coins fit lying flat. Sort coins by value for the parking meter, the launderette or a shopping trolley, or collect small change for the piggy bank. It fits in a car door pocket or a drawer; for other currencies, adjust the size in the generator.
Download
The file is made in your browser. We only count how often it is downloaded.
Join in
- Size
- 123.2 × 80.4 × 31.2 mm
- Print time
- ≈ 1 h 37 min
- Filament
- ≈ 41 g PLA
- Parts
- 2
Print settings
- Material
- PLA
- Layer height
- 0.2 mm
- Infill
- 15%
- Walls
- 2
- Supports
- none
Worked for others:
Tip: Print the box with the opening up and the lid with its top face down. No supports needed.
Estimated by our slicer-like calculation for a 0.4 mm nozzle. Your slicer may show slightly different values.
Adjust it
- Outside: 123.2 × 35.2 × 31.2 mm
- Inside: 120 × 32 × 30 mm
- With lid: 32.8 mm high
- Each compartment: 28.8 × 32 mm, 23.4 mm deep
This model comes from the “Box with lid” generator. Open it there with these settings and change any size you like.
Open in the generatorSimilar models
Weekly pill box with 7 compartments
Box for hearing aids
59 min2 parts
Pill box for one day
1 h 20 min2 parts
Box for glasses
3 h 8 min2 parts
Something wrong with this model? Report a problem