Luggage tag
7 min2 parts
Key tag “Home”
3D printing2 partsBeginner-friendlyNo supports
A key tag with “Home” in raised, rounded letters and a hole on the left for the key ring. On a full bunch it marks the house key, so you pick the right one at the door without searching. An ordinary split ring fits through the 5 mm hole; for the garage, the cellar or the car, just change the word in the generator.
Download
Calculated in your browser. Nothing is uploaded.
Join in
- Size
- 45.52 × 15.14 × 3.6 mm
- Print time
- ≈ 4 min
- Filament
- ≈ 1.7 g PLA
- Parts
- 2
Print settings
- Material
- PLA
- Layer height
- 0.2 mm
- Infill
- 15%
- Walls
- 2
- Supports
- none
Worked for others:
Tip: Print flat as shown, no supports. STL: one piece in one colour. 3MF: sign and lettering as two parts – give each a colour in the slicer. SVG: red is cut, black is engraved.
Estimated by our slicer-like calculation for a 0.4 mm nozzle. Your slicer may show slightly different values.
Adjust it
- Size: 45.52 × 15.14 mm, 3.6 mm thick
- Second colour: change filament at 2.4 mm height
This model comes from the “Sign and keychain” generator. Open it there with these settings and change any size you like.
Open in the generatorSimilar models
Luggage tag
Weekly pill box with 7 compartments
1 h 28 min2 parts
Herb label
4 min2 parts
Door sign “Do not disturb”
13 min2 parts
Something wrong with this model? Report a problem