Key tag “Home”
4 min2 parts
Luggage tag
3D printing2 partsBeginner-friendlyNo supports
A sturdy luggage tag with 10 mm raised letters on a 3 mm plate and a 6 mm hole on the left. Printed in a bright colour, it helps you spot your case on the baggage carousel and tell it apart from similar ones. Pull a cable tie or a luggage loop through the hole; on the tag itself a nickname or initials are enough, and your address is better kept on a card inside the bag.
Download
Calculated in your browser. Nothing is uploaded.
- Size
- 62.5 × 19.06 × 4.2 mm
- Print time
- ≈ 7 min
- Filament
- ≈ 3.1 g PLA
- Parts
- 2
Print settings
- Material
- PLA
- Layer height
- 0.2 mm
- Infill
- 15%
- Walls
- 2
- Supports
- none
Tip: Print flat as shown, no supports. STL: one piece in one colour. 3MF: sign and lettering as two parts – give each a colour in the slicer. SVG: red is cut, black is engraved.
Estimated by our slicer-like calculation for a 0.4 mm nozzle. Your slicer may show slightly different values.
Adjust it
- Size: 62.5 × 19.06 mm, 4.2 mm thick
- Second colour: change filament at 3 mm height
This model comes from the “Sign and keychain” generator. Open it there with these settings and change any size you like.
Open in the generatorSimilar models
Key tag “Home”
Weekly pill box with 7 compartments
1 h 28 min2 parts
Herb label
4 min2 parts
Door sign “Do not disturb”
13 min2 parts
Something wrong with this model? Report a problem