Jewellery box with 6 compartments
2 h 34 min2 parts
Sewing box with 8 compartments
3D printing2 partsBeginner-friendlyNo supports
A box with lid for sewing supplies, 160 × 90 × 45 mm inside and divided into 4 × 2 compartments. Thread reels, buttons, pins, safety pins, a tape measure and the thimble each get their own place, so everything is ready when a seam needs fixing. The rounded corners make it easy to pick out small buttons, and the flat lid lets you stack several boxes, for example one for knitting and one for embroidery.
Download
The file is made in your browser. We only count how often it is downloaded.
Join in
- Size
- 163.2 × 196.4 × 46.2 mm
- Print time
- ≈ 5 h 10 min
- Filament
- ≈ 135 g PLA
- Parts
- 2
Print settings
- Material
- PLA
- Layer height
- 0.2 mm
- Infill
- 15%
- Walls
- 2
- Supports
- none
Worked for others:
Tip: Print the box with the opening up and the lid with its top face down. No supports needed.
Estimated by our slicer-like calculation for a 0.4 mm nozzle. Your slicer may show slightly different values.
Adjust it
- Outside: 163.2 × 93.2 × 46.2 mm
- Inside: 160 × 90 × 45 mm
- With lid: 47.8 mm high
- Each compartment: 38.8 × 44.2 mm, 38.4 mm deep
This model comes from the “Box with lid” generator. Open it there with these settings and change any size you like.
Open in the generatorSimilar models
Jewellery box with 6 compartments
Box for 10 AA batteries
2 h 32 min2 parts
Key tray for the hallway
1 h 43 min1 part
Cosmetics drawer organizer
4 h 38 min1 part
Something wrong with this model? Report a problem