Jewellery box with 6 compartments
2 h 34 min2 parts
Key tray for the hallway
3D printing1 partBeginner-friendlyNo supports
A shallow tray without a lid, 140 × 90 × 25 mm inside with generous 15 mm corner radii, for the sideboard in the hallway. Keys, wallet, sunglasses and earphones land in one place when you come home and are quick to find when you leave again. Print it in a colour that suits your hallway; a few felt pads or a thin layer of cork underneath protect the furniture and stop the tray from sliding.
Download
The file is made in your browser. We only count how often it is downloaded.
Join in
- Size
- 144 × 94 × 26.2 mm
- Print time
- ≈ 1 h 43 min
- Filament
- ≈ 45 g PLA
- Parts
- 1
Print settings
- Material
- PLA
- Layer height
- 0.2 mm
- Infill
- 15%
- Walls
- 2
- Supports
- none
Worked for others:
Tip: Print the box with the opening up and the lid with its top face down. No supports needed.
Estimated by our slicer-like calculation for a 0.4 mm nozzle. Your slicer may show slightly different values.
Adjust it
- Outside: 144 × 94 × 26.2 mm
- Inside: 140 × 90 × 25 mm
This model comes from the “Box with lid” generator. Open it there with these settings and change any size you like.
Open in the generatorSimilar models
Jewellery box with 6 compartments
Box for 10 AA batteries
2 h 32 min2 parts
Sewing box with 8 compartments
5 h 10 min2 parts
Cosmetics drawer organizer
4 h 38 min1 part
Something wrong with this model? Report a problem