Weekly pill box with 7 compartments
1 h 28 min2 parts
Box for a retainer
3D printing2 partsBeginner-friendlyNo supports
A box with lid and well-rounded corners for a removable retainer, aligners or a night guard. Inside it is 80 × 75 × 35 mm, so most braces fit without bending. Outside it is 83.2 × 78.2 mm and 37.8 mm high with the lid – it fits in a school bag or handbag. Print it in a bright colour so it does not end up in the bin with a lunch tray.
Download
The file is made in your browser. We only count how often it is downloaded.
Join in
- Size
- 83.2 × 166.4 × 36.2 mm
- Print time
- ≈ 1 h 46 min
- Filament
- ≈ 46 g PLA
- Parts
- 2
Print settings
- Material
- PLA
- Layer height
- 0.2 mm
- Infill
- 15%
- Walls
- 2
- Supports
- none
Worked for others:
Tip: Print the box with the opening up and the lid with its top face down. No supports needed.
Estimated by our slicer-like calculation for a 0.4 mm nozzle. Your slicer may show slightly different values.
Adjust it
- Outside: 83.2 × 78.2 × 36.2 mm
- Inside: 80 × 75 × 35 mm
- With lid: 37.8 mm high
This model comes from the “Box with lid” generator. Open it there with these settings and change any size you like.
Open in the generatorSimilar models
Weekly pill box with 7 compartments
Coin box with 4 compartments
1 h 37 min2 parts
Box for hearing aids
59 min2 parts
Pill box for one day
1 h 20 min2 parts
Something wrong with this model? Report a problem