Weekly pill box with 7 compartments
1 h 28 min2 parts
Box for hearing aids
3D printing2 partsBeginner-friendlyNo supports
A small box with lid for your hearing aids at night: one compartment for the left, one for the right, each 29.2 × 45 mm and 18.4 mm deep. Mark the sides with a dot of colour so they never get mixed up. Outside the box is 63.2 × 48.2 mm and 27.8 mm high with the lid, small enough for the bedside table or a handbag. There is also room for spare batteries or domes.
Download
The file is made in your browser. We only count how often it is downloaded.
Join in
- Size
- 63.2 × 106.4 × 26.2 mm
- Print time
- ≈ 59 min
- Filament
- ≈ 25 g PLA
- Parts
- 2
Print settings
- Material
- PLA
- Layer height
- 0.2 mm
- Infill
- 15%
- Walls
- 2
- Supports
- none
Worked for others:
Tip: Print the box with the opening up and the lid with its top face down. No supports needed.
Estimated by our slicer-like calculation for a 0.4 mm nozzle. Your slicer may show slightly different values.
Adjust it
- Outside: 63.2 × 48.2 × 26.2 mm
- Inside: 60 × 45 × 25 mm
- With lid: 27.8 mm high
- Each compartment: 29.2 × 45 mm, 18.4 mm deep
This model comes from the “Box with lid” generator. Open it there with these settings and change any size you like.
Open in the generatorSimilar models
Weekly pill box with 7 compartments
Coin box with 4 compartments
1 h 37 min2 parts
Pill box for one day
1 h 20 min2 parts
Box for glasses
3 h 8 min2 parts
Something wrong with this model? Report a problem