Weekly pill box with 7 compartments
1 h 28 min2 parts
Pill box for one day
3D printing2 partsBeginner-friendlyNo supports
A slim pill box with lid for one day: four compartments for morning, noon, evening and night, each 28.8 × 35 mm and 13.4 mm deep. Outside it is 123.2 × 38.2 mm and 22.8 mm high with the lid, so it fits in a bag or jacket pocket. Write the times on the lid with a marker. The lid covers all four compartments, so open it over the table.
Download
The file is made in your browser. We only count how often it is downloaded.
Join in
- Size
- 123.2 × 86.4 × 21.2 mm
- Print time
- ≈ 1 h 20 min
- Filament
- ≈ 35 g PLA
- Parts
- 2
Print settings
- Material
- PLA
- Layer height
- 0.2 mm
- Infill
- 15%
- Walls
- 2
- Supports
- none
Worked for others:
Tip: Print the box with the opening up and the lid with its top face down. No supports needed.
Estimated by our slicer-like calculation for a 0.4 mm nozzle. Your slicer may show slightly different values.
Adjust it
- Outside: 123.2 × 38.2 × 21.2 mm
- Inside: 120 × 35 × 20 mm
- With lid: 22.8 mm high
- Each compartment: 28.8 × 35 mm, 13.4 mm deep
This model comes from the “Box with lid” generator. Open it there with these settings and change any size you like.
Open in the generatorSimilar models
Weekly pill box with 7 compartments
Coin box with 4 compartments
1 h 37 min2 parts
Box for hearing aids
59 min2 parts
Box for glasses
3 h 8 min2 parts
Something wrong with this model? Report a problem