Cable clip for the 3D printer
5 min1 part
PTFE tube clip
3D printing1 partBeginner-friendlyNo supports
A tiny stick-on clip for a PTFE tube with 4 mm outer diameter, the usual size on 3D printers. It holds the tube loosely, so the tube can still move when the print head travels, but no longer hangs in the way or kinks. The tube clips in through a 3.4 mm opening; the clip is only 11.4 × 7.4 mm and 10 mm wide. Stick a few along the path from the spool or dry box to the printer.
Download
The file is made in your browser. We only count how often it is downloaded.
Join in
- Size
- 11.4 × 7.37 × 10 mm
- Print time
- ≈ 5 min
- Filament
- ≈ 0.5 g PETG
- Parts
- 1
Print settings
- Material
- PETG
- Layer height
- 0.2 mm
- Infill
- 15%
- Walls
- 2
- Supports
- none
Worked for others:
Tip: Print lying on its side as shown, no supports needed. PLA and PETG both work; PETG bends more easily.
Estimated by our slicer-like calculation for a 0.4 mm nozzle. Your slicer may show slightly different values.
Adjust it
- Size: 11.4 mm long, 7.37 mm high, 10 mm wide
- Cables: 1 × 4 mm
- Opening to clip in: 3.4 mm
This model comes from the “Cable clip” generator. Open it there with these settings and change any size you like.
Open in the generatorSimilar models
Cable clip for the 3D printer
Filament label “PLA”
4 min2 parts
Nozzle box with 8 compartments
57 min2 parts
Glue stick holder for the 3D printer
52 min1 part
Something wrong with this model? Report a problem