PTFE tube clip
5 min1 part
Cable clip for the 3D printer
3D printing1 partBeginner-friendlyNo supports
A small stick-on clip that keeps two cables up to 5 mm tidy on the frame of your 3D printer. Use it for the cables to the extruder, a camera or an LED strip: they snap in through a 3.75 mm opening and stay clear of moving parts. The clip is 22.3 mm long, 8.5 mm high and 10 mm wide, with a flat base for double-sided tape. Print a few and space them along the frame.
Download
The file is made in your browser. We only count how often it is downloaded.
Join in
- Size
- 22.3 × 8.5 × 10 mm
- Print time
- ≈ 5 min
- Filament
- ≈ 1.1 g PETG
- Parts
- 1
Print settings
- Material
- PETG
- Layer height
- 0.2 mm
- Infill
- 15%
- Walls
- 2
- Supports
- none
Worked for others:
Tip: Print lying on its side as shown, no supports needed. PLA and PETG both work; PETG bends more easily.
Estimated by our slicer-like calculation for a 0.4 mm nozzle. Your slicer may show slightly different values.
Adjust it
- Size: 22.3 mm long, 8.5 mm high, 10 mm wide
- Cables: 2 × 5 mm
- Opening to clip in: 3.75 mm
This model comes from the “Cable clip” generator. Open it there with these settings and change any size you like.
Open in the generatorSimilar models
PTFE tube clip
Filament label “PLA”
4 min2 parts
Nozzle box with 8 compartments
57 min2 parts
Glue stick holder for the 3D printer
52 min1 part
Something wrong with this model? Report a problem