Paint pot organizer with 20 compartments
6 h 24 min1 part
Insert for 24 miniatures
3D printing1 partBeginner-friendlyNo supports
An insert with 24 compartments for a storage box with 180 × 120 mm inside, so each miniature gets its own spot. The compartments are 28.4 × 28.25 mm and 43.8 mm deep, enough for infantry on 25 mm bases. The insert is 179 × 119 × 45 mm and prints in one piece. Glue thin foam into the compartments and painted figures travel to the game without scratches.
Download
The file is made in your browser. We only count how often it is downloaded.
Join in
- Size
- 179 × 119 × 45 mm
- Print time
- ≈ 6 h 1 min
- Filament
- ≈ 150 g PLA
- Parts
- 1
Print settings
- Material
- PLA
- Layer height
- 0.2 mm
- Infill
- 15%
- Walls
- 2
- Supports
- none
Worked for others:
Tip: Print with the opening facing up, no supports needed. If the parts come out a little too wide, increase the clearance.
Estimated by our slicer-like calculation for a 0.4 mm nozzle. Your slicer may show slightly different values.
Adjust it
- Organizer: 179 × 119 × 45 mm
- Each compartment inside: 28.43 × 28.25 × 43.8 mm
This model comes from the “Drawer organizer” generator. Open it there with these settings and change any size you like.
Open in the generatorSimilar models
Paint pot organizer with 20 compartments
Miniature box with 12 compartments
7 h 50 min2 parts
Round bases 25 mm for miniatures, 10 pieces
25 min10 parts
Round bases 32 mm for miniatures, 6 pieces
27 min6 parts
Something wrong with this model? Report a problem