Garden hose holder
1 h 24 min1 part
Garden tool hook
3D printing1 partBeginner-friendlyNo supports
A sturdy screw-on hook for the shed or garage with a 50 mm opening, a long 30 mm tip and two holes for 5 mm screws. Spades and forks hang from their grip, and two hooks side by side carry a rake or broom by its head, so the tools stay off the floor and dry. Print it in PETG, which copes better with the heat in a shed, use solid wall plugs and test it with a growing load before you hang heavy tools on it.
Download
The file is made in your browser. We only count how often it is downloaded.
Join in
- Size
- 66 × 100 × 30 mm
- Print time
- ≈ 1 h 1 min
- Filament
- ≈ 32 g PETG
- Parts
- 1
Print settings
- Material
- PETG
- Layer height
- 0.2 mm
- Infill
- 40%
- Walls
- 4
- Supports
- none
Worked for others:
Tip: Print lying on its side as shown, no supports needed. Use at least 4 walls (perimeters) or 50 % infill so it can carry a load.
Estimated by our slicer-like calculation for a 0.4 mm nozzle. Your slicer may show slightly different values.
Adjust it
- Size: 100 mm high, 66 mm deep, 30 mm wide
- Opening: 50 mm
- 2 holes for screws up to 5 mm, 20.5 mm apart
This model comes from the “Hook” generator. Open it there with these settings and change any size you like.
Open in the generatorSimilar models
Garden hose holder
S-hook for hanging baskets
24 min1 part
Holder for 16 mm drip irrigation pipe
9 min1 part
Herb label
4 min2 parts
Something wrong with this model? Report a problem