Garden hose holder
1 h 24 min1 part
Holder for 16 mm drip irrigation pipe
3D printing1 partBeginner-friendlyNo supports
A screw-on holder for one 16 mm drip irrigation pipe, with a firm grip and a sturdy 2.2 mm wall. It fixes the supply pipe of a balcony or greenhouse watering system to a wall, a raised bed or a wooden post, so it stays straight and doesn't sag. Print it in PETG, as in the print settings, which copes with sun and water better than PLA; for 13 mm or 20 mm pipe, enter the diameter in the generator.
Download
The file is made in your browser. We only count how often it is downloaded.
Join in
- Size
- 44.6 × 18.9 × 15 mm
- Print time
- ≈ 9 min
- Filament
- ≈ 3.1 g PETG
- Parts
- 1
Print settings
- Material
- PETG
- Layer height
- 0.2 mm
- Infill
- 15%
- Walls
- 2
- Supports
- none
Worked for others:
Tip: Print lying on its side as shown, no supports needed. PLA and PETG both work; PETG bends more easily.
Estimated by our slicer-like calculation for a 0.4 mm nozzle. Your slicer may show slightly different values.
Adjust it
- Size: 44.6 mm long, 18.9 mm high, 15 mm wide
- Cables: 1 × 16 mm
- Opening to clip in: 10.4 mm
- 2 holes for screws up to 4 mm, 32.6 mm apart
This model comes from the “Cable clip” generator. Open it there with these settings and change any size you like.
Open in the generatorSimilar models
Garden hose holder
Garden tool hook
1 h 1 min1 part
S-hook for hanging baskets
24 min1 part
Herb label
4 min2 parts
Something wrong with this model? Report a problem