Business card stand for the desk
1 h 19 min1 part
Low tablet stand for drawing and writing
3D printing1 partBeginner-friendlyNo supports
A low, wide stand that tilts a tablet to 50° – a comfortable angle for drawing with a stylus, taking notes or typing on the screen. It is 180 mm wide, so a tablet in landscape rests on it without wobbling, and the 60 mm high backrest stays out of the way of your hand. Tablets up to 10 mm thick with a case fit into the slot. It is 74 mm deep and prints standing up without supports.
Download
The file is made in your browser. We only count how often it is downloaded.
Join in
- Size
- 180 × 74.42 × 60 mm
- Print time
- ≈ 3 h 40 min
- Filament
- ≈ 105 g PLA
- Parts
- 1
Print settings
- Material
- PLA
- Layer height
- 0.2 mm
- Infill
- 15%
- Walls
- 3
- Supports
- none
Worked for others:
Tip: Print standing up as shown, without supports. With PLA, 15 % infill and 3 walls (perimeters) it is sturdy enough; for a heavy tablet use 4 walls.
Estimated by our slicer-like calculation for a 0.4 mm nozzle. Your slicer may show slightly different values.
Adjust it
- Stand: 180 mm wide, 74.4 mm deep, 60 mm high
- For devices up to 10 mm thick
- Angle: 50°
- Front lip: 8 mm
- Without cable opening
This model comes from the “Phone and tablet stand” generator. Open it there with these settings and change any size you like.
Open in the generatorSimilar models
Business card stand for the desk
Postcard and photo stand
1 h 14 min1 part
Desk edge cable holder
9 min1 part
Stick-on bag hook for the desk
31 min1 part
Something wrong with this model? Report a problem