Low tablet stand for drawing and writing
3 h 40 min1 part
Business card stand for the desk
3D printing1 partBeginner-friendlyNo supports
A neat stand for business cards on the desk, the reception counter or a trade fair stand. It holds a stack up to 20 mm thick – about 50 cards – at 75°, so visitors can easily take one. Standard 85 × 55 mm cards fit with room to spare across the 95 mm width, and the 12 mm front lip keeps the stack in place. With 3 mm walls it saves material and prints without supports.
Download
The file is made in your browser. We only count how often it is downloaded.
Join in
- Size
- 95 × 41.88 × 45 mm
- Print time
- ≈ 1 h 19 min
- Filament
- ≈ 34 g PLA
- Parts
- 1
Print settings
- Material
- PLA
- Layer height
- 0.2 mm
- Infill
- 15%
- Walls
- 3
- Supports
- none
Worked for others:
Tip: Print standing up as shown, without supports. With PLA, 15 % infill and 3 walls (perimeters) it is sturdy enough; for a heavy tablet use 4 walls.
Estimated by our slicer-like calculation for a 0.4 mm nozzle. Your slicer may show slightly different values.
Adjust it
- Stand: 95 mm wide, 41.9 mm deep, 45 mm high
- For devices up to 20 mm thick
- Angle: 75°
- Front lip: 12 mm
- Without cable opening
This model comes from the “Phone and tablet stand” generator. Open it there with these settings and change any size you like.
Open in the generatorSimilar models
Low tablet stand for drawing and writing
Postcard and photo stand
1 h 14 min1 part
Desk edge cable holder
9 min1 part
Stick-on bag hook for the desk
31 min1 part
Something wrong with this model? Report a problem