Laser-cut pen holder
Laser cutting5 parts
Laser-cut letter tray for A4
Laser cutting5 partsBeginner-friendly
An open letter tray with finger joints for A4 paper, cut from five panels of 4 mm plywood or MDF and measuring 240 × 330 × 60 mm on the outside. The sheets lie flat inside with a little room all around, so letters, forms and drawings stay together on the desk. The bottom alone is 240 × 330 mm, so check first that the working area of your laser is large enough.
Download
The file is made in your browser. We only count how often it is downloaded.
Join in
- Size
- 240 × 330 × 60 mm
- Parts
- 5
- Material thickness
- 4 mm
Cutting settings
- Material thickness
- 4 mm
- Kerf
- 0.1 mm – Adjust it to your laser in the generator.
Worked for others:
Tip: Open the SVG or DXF in your laser software (e.g. LightBurn or xTool Creative Space). Cut lines are red and 0.1 mm thin. Cut a test corner first: if the joints are loose, raise the kerf; if they are too tight, lower it. Glue with wood glue.
Adjust it
- Outside: 240 × 330 × 60 mm
- Inside: 232 × 322 × 56 mm
- 5 parts, together 665.1 × 460.1 mm
This model comes from the “Laser box with finger joints” generator. Open it there with these settings and change any size you like.
Open in the generatorSimilar models
Laser-cut pen holder
Desk edge cable holder
9 min1 part
Stick-on bag hook for the desk
31 min1 part
Cable clip for thick desk edges 40 mm
10 min1 part
Something wrong with this model? Report a problem