Desk edge cable holder
9 min1 part
Large mug coaster for the desk
3D printing2 partsBeginner-friendlyNo supports
A large square coaster that gives your coffee mug a fixed place on the desk – no more rings on the wood or wet papers. At 110 × 110 mm it has room even for wide mugs, which stand on raised dots while the 2 mm rim keeps drips away from the keyboard and your notes. 4.4 mm thick; in two colours with a filament change at 2.4 mm it matches your desk.
Download
The file is made in your browser. We only count how often it is downloaded.
Join in
- Size
- 110 × 110 × 4.4 mm
- Print time
- ≈ 1 h 1 min
- Filament
- ≈ 31 g PLA
- Parts
- 2
Print settings
- Material
- PLA
- Layer height
- 0.2 mm
- Infill
- 15%
- Walls
- 2
- Supports
- none
Worked for others:
Tip: Print flat as shown, no supports. For two colours, change filament at the height shown (in the slicer: colour change at that layer), or load the 3MF and give the pattern its own colour. PLA works well; wipe the coaster with a damp cloth – it is not for the dishwasher.
Estimated by our slicer-like calculation for a 0.4 mm nozzle. Your slicer may show slightly different values.
Adjust it
- Size: 110 × 110 mm, 4.4 mm high
- Base: 2.4 mm
- Rim: 3 mm wide, 2 mm high, 104 mm inside
- Second colour: change filament at 2.4 mm height
This model comes from the “Coaster” generator. Open it there with these settings and change any size you like.
Open in the generatorSimilar models
Desk edge cable holder
Stick-on bag hook for the desk
31 min1 part
Cable clip for thick desk edges 40 mm
10 min1 part
Sign “Back in a minute”
12 min2 parts
Something wrong with this model? Report a problem