Bike pump holder
19 min1 part
Wall holder for a kick scooter
3D printing1 partBeginner-friendlyNo supports
A wall holder for a kick scooter in the hallway or the garage. The 32 mm stem snaps into the clip through a 27.8 mm opening, the handlebar rests on top and the scooter hangs off the floor. The clip sits 40 mm from the wall, so the grips don't scratch it. It is 64.7 mm long, 71.5 mm deep and 40 mm high, with two holes for 4 mm screws, 52.7 mm apart.
Download
The file is made in your browser. We only count how often it is downloaded.
Join in
- Size
- 64.72 × 71.51 × 40 mm
- Print time
- ≈ 59 min
- Filament
- ≈ 28 g PETG
- Parts
- 1
Print settings
- Material
- PETG
- Layer height
- 0.2 mm
- Infill
- 20%
- Walls
- 3
- Supports
- none
Worked for others:
Tip: Print standing up as shown, without supports. PETG is best for clips: it bends without breaking. 3 walls (perimeters) and 20 % infill.
Estimated by our slicer-like calculation for a 0.4 mm nozzle. Your slicer may show slightly different values.
Adjust it
- Size: 64.7 mm long, 71.5 mm deep, 40 mm high
- Holders: 1 for 32 mm
- Opening to clip in: 27.8 mm
- Distance from wall: 40 mm
- 2 holes for screws up to 4 mm, 52.7 mm apart
This model comes from the “Wall holder for round things” generator. Open it there with these settings and change any size you like.
Open in the generatorSimilar models
Bike pump holder
Cup holder to stick on
1 h 38 min1 part
Bike helmet hook
52 min1 part
Car charging cable clip
8 min1 part
Something wrong with this model? Report a problem