Cup holder to stick on
1 h 38 min1 part
Bike pump holder
3D printing1 partBeginner-friendlyNo supports
A clip that keeps a mini bike pump on the wall of the garage or bike cellar, so it is at hand before the next ride. It takes pumps up to 30 mm thick, which snap in through a 26 mm opening, and sits 5 mm from the wall. Fix it with two 4 mm screws; for a long pump, print two and fit one at the top and one at the bottom. 61 × 33 × 20 mm, best in PETG.
Download
The file is made in your browser. We only count how often it is downloaded.
Join in
- Size
- 60.7 × 33.35 × 20 mm
- Print time
- ≈ 19 min
- Filament
- ≈ 7.3 g PETG
- Parts
- 1
Print settings
- Material
- PETG
- Layer height
- 0.2 mm
- Infill
- 20%
- Walls
- 3
- Supports
- none
Worked for others:
Tip: Print standing up as shown, without supports. PETG is best for clips: it bends without breaking. 3 walls (perimeters) and 20 % infill.
Estimated by our slicer-like calculation for a 0.4 mm nozzle. Your slicer may show slightly different values.
Adjust it
- Size: 60.7 mm long, 33.3 mm deep, 20 mm high
- Holders: 1 for 30 mm
- Opening to clip in: 26.1 mm
- Distance from wall: 5 mm
- 2 holes for screws up to 4 mm, 48.7 mm apart
This model comes from the “Wall holder for round things” generator. Open it there with these settings and change any size you like.
Open in the generatorSimilar models
Cup holder to stick on
Wall holder for a kick scooter
59 min1 part
Bike helmet hook
52 min1 part
Car charging cable clip
8 min1 part
Something wrong with this model? Report a problem