Garden hose holder
1 h 24 min1 part
Herb label
3D printing2 partsBeginner-friendlyNo supports
A small label for the herb pot with raised letters and a hole on the left: tie it to the pot or to a stick in the bed with string or wire. The 3MF keeps plate and lettering apart, so you can print the word in a second colour. For other herbs, just change the text in the generator.
Download
Calculated in your browser. Nothing is uploaded.
- Size
- 42.74 × 16.74 × 3.6 mm
- Print time
- ≈ 4 min
- Filament
- ≈ 1.7 g PLA
- Parts
- 2
Print settings
- Material
- PLA
- Layer height
- 0.2 mm
- Infill
- 15%
- Walls
- 2
- Supports
- none
Tip: Print flat as shown, no supports. STL: one piece in one colour. 3MF: sign and lettering as two parts – give each a colour in the slicer. SVG: red is cut, black is engraved.
Estimated by our slicer-like calculation for a 0.4 mm nozzle. Your slicer may show slightly different values.
Adjust it
- Size: 42.74 × 16.74 mm, 3.6 mm thick
- Second colour: change filament at 2.4 mm height
This model comes from the “Sign and keychain” generator. Open it there with these settings and change any size you like.
Open in the generatorSimilar models
Garden hose holder
Key tag “Home”
4 min2 parts
Door sign “Do not disturb”
13 min2 parts
Toilet door sign
14 min2 parts
Something wrong with this model? Report a problem